> For the complete documentation index, see [llms.txt](https://docs.motivewave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.motivewave.com/knowledge-base/charts/component-and-study-visibility.md).

# Component and Study Visibility

Visibility is a very useful feature in MotiveWave® that enables you to specify the bar sizes where a component is visible. This can be very useful to avoid clutter when switching bar sizes on a chart.

In the screenshot below, the initial visibility setting for the line component is set to **All Intervals** allowing it to show on all open charts of that particular symbol.

<figure><img src="/files/zmNPGzrKUxmkWiN15awa" alt=""><figcaption></figcaption></figure>

The Visibility setting can be set from the Properties dialog or via the right click menu on the component.

<figure><img src="/files/d5ppXg9Kg9ijHrjM7Iyq" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/fb3zZUnrgpIjTXPce0DJ" alt=""><figcaption></figcaption></figure>

With the visibility setting now set to lower than 30 minutes, the line component only shows on the 15 minute and 5 minute charts.

<figure><img src="/files/Itu4yCjdN7SmGaV4j413" alt=""><figcaption></figcaption></figure>

Similarly, the study visibility can also be assigned from the Properties dialog or via the right click menu on the study.

<figure><img src="/files/dQ7CE7u77mQsWlJqclNF" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/EtRqe6sPJg0ZhpzJS9VM" alt=""><figcaption></figcaption></figure>